shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 Is every thing right in the steps I mentioned or do I need to do something else apart Also extract ngoanrazor's app and add to rofs2. see this post for modding starter arm rsc. http://forum.gizmolord.com/index.php?topic=2764.msg35284#msg35284 Replace matrixmenu.exe entry with replacehs.exe following guide in above link. Rest is fine. Then after flashing follow this: http://forum.gizmolord.com/index.php?topic=2764.msg35504#msg35504 Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 OMG ....this thread...becoming...confusion..... We should try....or nt try..... I m noting the methods...and i will flash my phone today... And also other beta....flashers will test..... +1 for all... Pavan, Post various methods links to first page and finally we shall choose the best one out by discussion here . Let me help you. My method already on first page. At the end add the link http://forum.gizmolord.com/index.php?topic=2764.msg35505#msg35505 2nd method ankursmooth: link here http://forum.gizmolord.com/index.php?topic=2764.msg35525#msg35525 Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 szakalit is a great contributer to symbian community and we need some more people like him. Yes bro, agreed a 1000 times. Also, don't forget the wiz CODERUS Quote Link to comment Share on other sites More sharing options...
ankursmooth Posted February 19, 2012 Report Share Posted February 19, 2012 Pavan, Post various methods links to first page and finally we shall choose the best one out by discussion here . Let me help you. My method already on first page. At the end add the link http://forum.gizmolord.com/index.php?topic=2764.msg35505#msg35505 2nd method ankursmooth: link here http://forum.gizmolord.com/index.php?topic=2764.msg35525#msg35525 Brother I have no method This is summary of methods I read on this thread Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 Brother I have no method This is summary of methods I read on this thread paid attention to your idea. The flaw is the ram taken by homescreen(ailaunch.exe) which is terminable but restarts in your case but in my method you can terminate home screen process and it won't restart automatically Quote Link to comment Share on other sites More sharing options...
pavan061994 Posted February 19, 2012 Author Report Share Posted February 19, 2012 ok then pawan post ankursmooth post as SUMMARYya....sure... Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 ya....sure... sorry, my previous post edited. see again Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 @vizhigal, do you have any knowledge in symbian c++ or you know anybody who can help in this? Quote Link to comment Share on other sites More sharing options...
ankursmooth Posted February 19, 2012 Report Share Posted February 19, 2012 And also when you talk abt splitting shell to get menu with middle button Then also consider removing exit button Quote Link to comment Share on other sites More sharing options...
pavan061994 Posted February 19, 2012 Author Report Share Posted February 19, 2012 sorry, my previous post edited. see againsee 1st post ...see and note me to if there is change or bug.. Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 And also when you talk abt splitting shell to get menu with middle button Then also consider removing exit button Doesn't matter bro. After pressing exit, belle shell automatically restart. Also modifiying belle shell not permitted. @pavan mate post this after 1st method and not 2nd to avoid confusion We have 2 follow steps from 1) method: 1.but dont put ailaunch.exe blank in rofs2......but put matrixmenu.exe blank in sys/bin...... 2.edit starter.rsc.........matrixmenu to.....replacehse.exe.....but be sure to rename........replacehs.exe....in phone...by xplore...........c:/sys/bin...... 3.For dialer .....use the dial pad from 2 nd page.... 4.for network:1) on 2nd reboot after belle hs loaded,long press middle white button until show open apps menu opens, 2)then click on homescreen icon, wait for 10 sec and again use that show open app enu to return to belle hs 3)use killme to terminate homescreen process. Quote Link to comment Share on other sites More sharing options...
pavan061994 Posted February 19, 2012 Author Report Share Posted February 19, 2012 Doesn't matter bro. After pressing exit, belle shell automatically restart. Also modifiying belle shell not permitted. @pavan mate post this after 1st method and not 2nd to avoid confusion See I have edited Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 @pavan, it's not 2nd method. It's continuation of first method. . +1 for making changes promptly Quote Link to comment Share on other sites More sharing options...
pavan061994 Posted February 19, 2012 Author Report Share Posted February 19, 2012 @pavan, it's not 2nd method. It's continuation of first method. . +1 for making changes promptlyBut Had it Tested Or Just Thought!!! Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 wait mate, just paste this replacing existing guide @ first post: Below is the method how to get in: by shivam Steps to set belle shell hs as default Method 1): 1) Install qt,belleshell,dialer(For dialer:- http://www.mediafire.com/download.php?0bxu9o2k7zjz8ta) on your phone in c drive. 2)go to C:\sys\bin of your phone and rename Belleshell.exe to bilaunch.exe. NOTE: please note down the directory link properly i.e. C:\SYS\BIN\belleshell.exe (This is important as everything is case sensitive in rsc file) 3) extract rofs2 by using nfestd or nokia cooker 4)extract app by ngoanrazor( www.4shared.com/mobile/3MXtroMt/replaceHs_unsigned.html ) via extsis and add to rofs2 5)rename replacehs.exe to replacehse.exe in rofs2/sys/bin/ 6) open starter_arm.rsc using resedit(download from here http://forum.gizmolord.com/index.php?topic=2764.msg35320#msg35320) and edit the line Z:\sys\bin\ailaunch.exe to C:\SYS\BIN\bilaunch.exe. Also replace Z:\sys\bin\matrixmenu.exe (for c6 ports) or Z:\sys\bin\menu3.exe (for 5800 ofw) entry in Starter_arm.rsc and change to Z:\sys\bin\replacehse.exe . Then click options menu in resedit and click save. 7) Save the changes and repack your rofs2 8) Flash your rofs2 with JAF 9) your phone will start with belle shell as primary hs. IMPORTANT: Please don't flash your uda of your fw.,else your phone won't boot. NOTE: There is a bug that network won't start after 1st boot. Temp solution for that: 1) on 2nd reboot after belle hs loaded,long press middle white button until show open apps menu opens, 2)then click on homescreen icon, wait for 10 sec and again use that show open app enu to return to belle hs 3)use killme \Jbak taskmanager to terminate homescreen process. Note: the homescreen terminates and will not restart and thus saving 7 mb ram and network coming too. faq see here: 1) After installing app, menu doesnot update? Ans. For that long press middle button to show open apps, Then long press on belle shell app icon , then you will get 2 options, 1)open, 2) exit. Press exit. The belle shell will close but automatically restart with menu updated 2) is there need to install dial pad from irajesh mentioned in first step? A) Yes. Without installing this .sis, dialer not opening via belle hs 3)can I use *#7370# to reformat my phone? A. Not possible. If you do so, then phone won't boot. Only reflashing with original fw can fix error. To get back belle hs follow the guide again Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 @pavan, sorry for troubling you again. another +1 from me. Also delete some messages from your inbox, I am unable to PM you Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 But Had it Tested Or Just Thought!!! All this tested last night by me. Quote Link to comment Share on other sites More sharing options...
pavan061994 Posted February 19, 2012 Author Report Share Posted February 19, 2012 @pavan, sorry for troubling you again. another +1 from me. Also delete some messages from your inbox, I am unable to PM you don't say sorry bro..... I will update it... Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 Also delete this from first post **Menu button won't open default menu. For that we must replace in matrixmenu.exe to ngoanrazor's app in starter arm.rsc For that extract his app using extsis and copy the contents of that app to rofs2. rename replacehs.exe to replacehse.exe and edit the starter arm.rsc entry of matrixmenu and change to Z:\sys\bin\replacehse.exe then on reflashing the cfw default menu wont boot ,so more memory and also on pressing middle button nothing happens.... ....................................................By Shivam.. Quote Link to comment Share on other sites More sharing options...
shubham926 Posted February 19, 2012 Report Share Posted February 19, 2012 wait mate, just paste this replacing existing guide @ first post: Below is the method how to get in: by shivam Steps to set belle shell hs as default Method 1): 1) Install qt,belleshell,dialer(For dialer:- http://www.mediafire.com/download.php?0bxu9o2k7zjz8ta) on your phone in c drive. 2)go to C:\sys\bin of your phone and rename Belleshell.exe to bilaunch.exe. NOTE: please note down the directory link properly i.e. C:\SYS\BIN\belleshell.exe (This is important as everything is case sensitive in rsc file) 3) extract rofs2 by using nfestd or nokia cooker 4)extract app by ngoanrazor( www.4shared.com/mobile/3MXtroMt/replaceHs_unsigned.html ) via extsis and add to rofs2 5)rename replacehs.exe to replacehse.exe in rofs2/sys/bin/ 6) open starter_arm.rsc using resedit(download from here http://forum.gizmolord.com/index.php?topic=2764.msg35320#msg35320) and edit the line Z:\sys\bin\ailaunch.exe to C:\SYS\BIN\bilaunch.exe. Also replace Z:\sys\bin\matrixmenu.exe (for c6 ports) or Z:\sys\bin\menu3.exe (for 5800 ofw) entry in Starter_arm.rsc and change to Z:\sys\bin\replacehse.exe . Then click options menu in resedit and click save. 7) Save the changes and repack your rofs2 8) Flash your rofs2 with JAF 9) your phone will start with belle shell as primary hs. IMPORTANT: Please don't flash your uda of your fw.,else your phone won't boot. NOTE: There is a bug that network won't start after 1st boot. Temp solution for that: 1) on 2nd reboot after belle hs loaded,long press middle white button until show open apps menu opens, 2)then click on homescreen icon, wait for 10 sec and again use that show open app enu to return to belle hs 3)use killme \Jbak taskmanager to terminate homescreen process. Note: the homescreen terminates and will not restart and thus saving 7 mb ram and network coming too. faq see here: 1) After installing app, menu doesnot update? Ans. For that long press middle button to show open apps, Then long press on belle shell app icon , then you will get 2 options, 1)open, 2) exit. Press exit. The belle shell will close but automatically restart with menu updated 2) is there need to install dial pad from irajesh mentioned in first step? A) Yes. Without installing this .sis, dialer not opening via belle hs 3)can I use *#7370# to reformat my phone? A. Not possible. If you do so, then phone won't boot. Only reflashing with original fw can fix error. To get back belle hs follow the guide again reflashing every time not possible Quote Link to comment Share on other sites More sharing options...
pavan061994 Posted February 19, 2012 Author Report Share Posted February 19, 2012 All this tested last night by me.ok then +1 for u.. Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 reflashing every time not possible For that, integrate qt and belleshell hs into rofs2, and modify starter_arm.rsc ,entry bilaunch to z:\sys\bin\bilaunch.exe. Save and then rename the belleshell.exe in rofs2\sys\bin to bilaunch.exe. @pavan, place under faq qn 3 solution in first page Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 pavan, sent you very important pm. pls check. Quote Link to comment Share on other sites More sharing options...
pavan061994 Posted February 19, 2012 Author Report Share Posted February 19, 2012 pavan, sent you very important pm. pls check.Check ur PM mate!!! Quote Link to comment Share on other sites More sharing options...
shivam94 Posted February 19, 2012 Report Share Posted February 19, 2012 Check ur PM mate!!! check your inbox now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.