z4reg Posted November 7, 2012 Report Posted November 7, 2012 Can somebody please working link to binh core FOR 5800 ( rm-356 ) V52.0.007 New Core? 5800xm - rm356 My version is V 52.0.007 I have Question ... Should i stay on this version or upgrade to v60.0.3? Thanks. if your ofw available for this version than you can ofw? original firmware ? I see old firmware are available thru NaviFirm Plus. EDit: I tried the below core file. 4shared.com/archive/UX6J30s6/RM-356_V520007_New_Core_by_Bin.html now phone is not starting, showing garbled screen then getting turned off. I followed the process http://forum.gizmolord.com/custom-firmware-discussions/%28tutorial%29-how-to-flash-with-3-files-%28c00-rofs2-and-uda%29-by-die2mrw007/, didn't touch any button or screen. I also tried removing battery when they there was no sign of any activity. Suspecting above file was wrong. .. Can somebody provide me the core file required for this version? Now have successfully flashing back to original firmware v52.0.7 which i downloaded thru NaviFirm Plus using "use ini" method in JAF. jaf log : JAF version 1.98.62 Detected PKEY: 90009699 Card life counter: 99.99% P-key nokia module version 01.02 FBUS INTERFACE NOT CONNECTED!!! USB Cable Driver version: 7.1.78.0 Changing mode...Done! FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Detected P-KEY: 90009699 P-key nokia module version 01.02 Init usb communication... Phone Type: FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Detected P-KEY: 90009699 P-key nokia module version 01.02 Init usb communication... Phone Type: FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Detected P-KEY: 90009699 P-key nokia module version 01.02 Init usb communication... Phone Type: FILES SET FOR FLASHING: MCU Flash file: C:\Documents and Settings\user\Desktop\nokia\linspirat\LTS rev2.1\RM-356_52.0.007_prd.core.C0r PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Detected P-KEY: 90009699 P-key nokia module version 01.02 Init usb communication... Phone Type: FILES SET FOR FLASHING: MCU Flash file: C:\Documents and Settings\user\Desktop\nokia\linspirat\LTS rev2.1\RM-356_52.0.007_prd.core.C0r PPM Flash file: C:\Documents and Settings\user\Desktop\nokia\linspirat\LTS rev2.1\RM-356_52.0.007_prd.rofs2.V20 CNT Flash file: NONE APE Variant file: NONE Detected P-KEY: 90009699 P-key nokia module version 01.02 Init usb communication... Phone Type: FILES SET FOR FLASHING: MCU Flash file: C:\Documents and Settings\user\Desktop\nokia\linspirat\LTS rev2.1\RM-356_52.0.007_prd.core.C0r PPM Flash file: C:\Documents and Settings\user\Desktop\nokia\linspirat\LTS rev2.1\RM-356_52.0.007_prd.rofs2.V20 CNT Flash file: NONE APE Variant file: C:\Documents and Settings\user\Desktop\nokia\linspirat\LTS rev2.1\RM-356_52.0.007_000_001_U001.uda.fpsx Detected P-KEY: 90009699 P-key nokia module version 01.02 Init usb communication... PRESS POWER ON NOW! Searching for phone...Not found!!! Detected P-KEY: 90009699 P-key nokia module version 01.02 Init usb communication... PRESS POWER ON NOW! Searching for phone...Found Sending RAW loader... Using Tk–!012.005 Elf2flash 09.11.000 CMT RAW loader... Patching RAW boot step1... Patching RAW boot step2... Patching RAW boot step3... Sending RAW Loader... ....................Loader Sent! Stage 2 starting..................PUBKEYS already sent... PUBKEYS already sent... PUBKEYS already sent... PUBKEYS already sent... PUBKEYS already sent... ...........Phone prepared OK! Waiting for the phone to boot... Searching for phone... Status byte: 8000 Selecting CMT flash... Result: 0000 Phone is in flash mode... CMT blocks: 715, APE blocks: 0 Erasing cmt... Processing C:\Documents and Settings\user\Desktop\nokia\linspirat\LTS rev2.1\RM-356_52.0.007_prd.core.C0r... Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000 Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000 Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000 Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000 Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000 Partition result: 0014 Processing C:\Documents and Settings\user\Desktop\nokia\linspirat\LTS rev2.1\RM-356_52.0.007_prd.rofs2.V20... Erasing cmt zone 02C60000 - 09D5FFFF ... Erase result: 0000 Processing C:\Documents and Settings\user\Desktop\nokia\linspirat\LTS rev2.1\RM-356_52.0.007_000_001_U001.uda.fpsx... Erasing cmt zone 09E60000 - 0F47FFFF ... Erase result: 0000 Send CMT CFG... Writing cmt... Processing C:\Documents and Settings\user\Desktop\nokia\linspirat\LTS rev2.1\RM-356_52.0.007_prd.core.C0r... Sending CMT HASH for ADA Sending CMT HASH for KEYS Sending CMT HASH for PRIMAPP Sending CMT HASH for RAP3NAND Sending CMT HASH for PASUBTOC cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending... cmt->PAPUB keys already sent... cmt->PAPUB keys already sent... cmt->PAPUB keys already sent... cmt->PAPUB keys already sent... Sending CMT HASH for SOS*UPDAPP Sending CMT HASH for SOS*ENO Sending CMT HASH for SOS*DSP0 Sending CMT HASH for SOS*ISASW Sending CMT HASH for SOS+CORE Sending CMT HASH for SOS+ROFS1 Processing C:\Documents and Settings\user\Desktop\nokia\linspirat\LTS rev2.1\RM-356_52.0.007_prd.rofs2.V20... Sending CMT HASH for SOS+ROFS2 Write result 27: 1701 Processing C:\Documents and Settings\user\Desktop\nokia\linspirat\LTS rev2.1\RM-356_52.0.007_000_001_U001.uda.fpsx... Rebooting... Finishing CMT session... Restarting CMT... Pooling phone... MCUSW: V ICPR72_10w25.3 11-10-10 RM-356 (c) Nokia APESW: V 52.0.007 VariantSW: V 52.0.007 Prodcode: 0575590 Done! Thanks. Quote
navratn123 Posted November 7, 2012 Report Posted November 7, 2012 you have to use same core as rofs........ Quote
z4reg Posted November 7, 2012 Report Posted November 7, 2012 you have to use same core as rofs........ Sorry didn't get you, could you please elaborate. and where do find core? Thanks. Log difference : http://pastehtml.com/view/chj85fy79.html Quote
navratn123 Posted November 7, 2012 Report Posted November 7, 2012 Sorry didn't get you, could you please elaborate. and where do find core? Thanks. means a rofs depends on core you can only use those core which is modified with it's rofs............ Quote
z4reg Posted November 7, 2012 Report Posted November 7, 2012 means a rofs depends on core you can only use those core which is modified with it's rofs............ Thanks for explanation. Where do find proper core file for LTS rev2.1 RM-356 v52.0.007 ? Log difference : http://pastehtml.com/view/chj85fy79.html Quote
navratn123 Posted November 7, 2012 Report Posted November 7, 2012 Thanks for explanation. Where do find proper core file for LTS rev2.1 RM-356 v52.0.007 ? Log difference : http://pastehtml.com/view/chj85fy79.html you can use sfr cores and team eclipse also uploaded core ......... search on this forum........... Quote
z4reg Posted November 7, 2012 Report Posted November 7, 2012 you can use sfr cores and team eclipse also uploaded core ......... search on this forum........... Bro, I have been searching for the same since last few days. Haven't been able to find it either on google or forum itself. .... Most of the links are broken. I would be grateful if you can give me the link for it. Found : RM-356_60.0.003_Refresh Core by Binh24.rar https://docs.google.com/folder/d/0B9RJBGceAZEEV0hwNVNsMFpLTTg/edit?pli=1 Will this work with RM-356_52.0.007? Quote
navratn123 Posted November 7, 2012 Report Posted November 7, 2012 Bro, I have been searching for the same since last few days. Haven't been able to find it either on google or forum itself. .... Most of the links are broken. I would be grateful if you can give me the link for it. Found : RM-356_60.0.003_Refresh Core by Binh24.rar https://docs.google.com/folder/d/0B9RJBGceAZEEV0hwNVNsMFpLTTg/edit?pli=1 Will this work with RM-356_52.0.007? nope....... ask to creator....... Quote
tintinboss Posted November 9, 2012 Author Report Posted November 9, 2012 Bro, I have been searching for the same since last few days. Haven't been able to find it either on google or forum itself. .... Most of the links are broken. I would be grateful if you can give me the link for it. Found : RM-356_60.0.003_Refresh Core by Binh24.rar https://docs.google.com/folder/d/0B9RJBGceAZEEV0hwNVNsMFpLTTg/edit?pli=1 Will this work with RM-356_52.0.007? Hi z4reg, sorry I'm not active on forum these days... However, I thought the topic is well covered in the thread... here's the procedure: STEP:1 : Install Nokia PC SUITE is you don't have it already and connect phone with data cable at-least once. Now go to mass storage mode and delete all files and folders named "Private", "Resources", "Sys", "System" etc (Better if you can format your memory card). Now make a backup of ur Contacts and Messages if you need to. STEP:2 : Download and install JAF from here http://www.mediafire.com/?yn1ywy5cunj STEP:3 : Download V60.0.003 PNHT Core FOR 113 MB (This is important). Please ask some1 with RM356 to reupload the core. STEP:4 : Okay, we now have all the files needed i) The ROFS2 with a name : RM-356_60.0.003_prd.rofs2.V20 ii) The UDA with name : RM-356_60.0.003_000_001_U001.uda.fpsx iii) The core with name :RM-356_60.0.003_prd.core.c00 STEP:5 : Now rename the CORE exactly like this: RM-356_60.0.003_prd.core.c0r Okay cool Now copy all this files and put them all in a new folder in your Desktop (Or anywhere else you like) STEP:6: Now start the OGM JAF (Blue icon on your desktop/start menu) and click on go Alrighty, an error might come up, just ignore it by pressing OK. Now ""UNTICK"" EVERYTHING "without" -- "Manual Flash" , "Dead USB" and "Normal mode" (you can even untick Normal mode). STEP:7 : Now it's pretty easy! ----Click MCU button and select that RM-356_60.0.003_prd.core.c0r file in your desktop folder (MCU Button will glow green!) ----Click on PPM button and select RM-356_60.0.003_prd.rofs2.V20 file (PPM button glows green) ----Click on APE Variant and select RM-356_60.0.003_000_001_U001.uda.fpsx (Ape button glows) ---- WE DONT NEED CNT BUTTON STEP:8 : Hmm we are ready to FLASH! So click on the Flash Button and a scary sound effect is played with a warning popup Click on Yes and in the log window on the bottom of the program, you'll see some lines are being logged. It will eventually display Searching for phone... Press Power Button now... And you do just that! Click on your phones power button once (not too long! just once gently...) Flashing begins.. Wait for it to end. When again a scary sound plays and it says Done!!! You're done finally! Remove the battery from your phone, reinsert and restart your phone! Take.Care ~tintinboss Quote
sumicool7 Posted November 20, 2012 Report Posted November 20, 2012 I have a question, I downloaded the rofs2 for Nokia X6 RM-599. On opening the archive I found that the rofs and uda are meant for firmware version 32.0.002 I am having at present Distro CFW with version 40.0.002. Isn't there a rofs for version 40.0.002? Please help, I really want to try out this firmware Quote
navratn123 Posted November 20, 2012 Report Posted November 20, 2012 I have a question, I downloaded the rofs2 for Nokia X6 RM-599. On opening the archive I found that the rofs and uda are meant for firmware version 32.0.002 I am having at present Distro CFW with version 40.0.002. Isn't there a rofs for version 40.0.002? Please help, I really want to try out this firmware don't worry just rename rofs2 according your core and flash...... Quote
zeeshan.developer Posted November 25, 2012 Report Posted November 25, 2012 I am having Nokia 5235 with RM-588 v51.6.002 ofw. If I flash with this LinsPirat LTS cfw, will I be able to flash it back to RM-588 v51.6.002 ofw? I have downloaded the ofw as well with navifirm. EDIT: I checked this cfw is v50.0.001, what can I do for my v51.6.002 as I read downgrade can make the phone go dead! Any other versions of any cfw for my version, so that I can flash to that cfw and if not interested flash bak to my ofw? Quote
LRajesh555 Posted November 25, 2012 Report Posted November 25, 2012 I am having Nokia 5235 with RM-588 v51.6.002 ofw. If I flash with this LinsPirat LTS cfw, will I be able to flash it back to RM-588 v51.6.002 ofw? I have downloaded the ofw as well with navifirm. EDIT: I checked this cfw is v50.0.001, what can I do for my v51.6.002 as I read downgrade can make the phone go dead! Any other versions of any cfw for my version, so that I can flash to that cfw and if not interested flash bak to my ofw? Yes you can go back to OFW anytimes by flashing with OFW files. And don't worry about the rofs2 version. Just use v51.6.002 core with this rofs2 and flash using 3 file flashing method by die2mrw007. Quote
zeeshan.developer Posted November 26, 2012 Report Posted November 26, 2012 Yes you can go back to OFW anytimes by flashing with OFW files. And don't worry about the rofs2 version. Just use v51.6.002 core with this rofs2 and flash using 3 file flashing method by die2mrw007. Thanks for the tip. Do you mean v51.6.002 core from ofw (RM-588_51.6.002_prd.core.C00)? If not, please provide link. Quote
LRajesh555 Posted November 26, 2012 Report Posted November 26, 2012 Thanks for the tip. Do you mean v51.6.002 core from ofw (RM-588_51.6.002_prd.core.C00)? If not, please provide link. No. Not the core from Navifirm. Use repartitioned core of v51.6.002. Here is the link Quote
sharozkhan007 Posted November 27, 2012 Report Posted November 27, 2012 I flashed it 3 time but ending up with a bricked phone I am using 5800(RM-356) v60 can any1 plz provide me the links for all the the file(core,rofs2,uda) for v60 Quote
RaazVeerShuvo Posted November 28, 2012 Report Posted November 28, 2012 Where's the files for RM356 V60???? Can anyone provide this? Quote
amitydv12 Posted November 28, 2012 Report Posted November 28, 2012 Hi z4reg, sorry I'm not active on forum these days... However, I thought the topic is well covered in the thread... here's the procedure: STEP:1 : Install Nokia PC SUITE is you don't have it already and connect phone with data cable at-least once. Now go to mass storage mode and delete all files and folders named "Private", "Resources", "Sys", "System" etc (Better if you can format your memory card). Now make a backup of ur Contacts and Messages if you need to. STEP:2 : Download and install JAF from here http://www.mediafire.com/?yn1ywy5cunj STEP:3 : Download V60.0.003 PNHT Core FOR 113 MB (This is important). Please ask some1 with RM356 to reupload the core. STEP:4 : Okay, we now have all the files needed i) The ROFS2 with a name : RM-356_60.0.003_prd.rofs2.V20 ii) The UDA with name : RM-356_60.0.003_000_001_U001.uda.fpsx iii) The core with name :RM-356_60.0.003_prd.core.c00 STEP:5 : Now rename the CORE exactly like this: RM-356_60.0.003_prd.core.c0r Okay cool Now copy all this files and put them all in a new folder in your Desktop (Or anywhere else you like) STEP:6: Now start the OGM JAF (Blue icon on your desktop/start menu) and click on go Alrighty, an error might come up, just ignore it by pressing OK. Now ""UNTICK"" EVERYTHING "without" -- "Manual Flash" , "Dead USB" and "Normal mode" (you can even untick Normal mode). STEP:7 : Now it's pretty easy! ----Click MCU button and select that RM-356_60.0.003_prd.core.c0r file in your desktop folder (MCU Button will glow green!) ----Click on PPM button and select RM-356_60.0.003_prd.rofs2.V20 file (PPM button glows green) ----Click on APE Variant and select RM-356_60.0.003_000_001_U001.uda.fpsx (Ape button glows) ---- WE DONT NEED CNT BUTTON STEP:8 : Hmm we are ready to FLASH! So click on the Flash Button and a scary sound effect is played with a warning popup Click on Yes and in the log window on the bottom of the program, you'll see some lines are being logged. It will eventually display Searching for phone... Press Power Button now... And you do just that! Click on your phones power button once (not too long! just once gently...) Flashing begins.. Wait for it to end. When again a scary sound plays and it says Done!!! You're done finally! Remove the battery from your phone, reinsert and restart your phone! Take.Care ~tintinboss hello tiitinboss bro.. first of all ++1 for your cfw.. it looks amazing.. as i am using RM-356 v60 n the cfw files are meant for lower version.. i tried to flash with your rofs2 & v60 core but end up with a bricked phone.. so please provide the updated links for RM-356 v60.0.003.. or provide some tutorial for porting it to v60.. +1 for help Quote
respo Posted December 3, 2012 Report Posted December 3, 2012 please help flash files are corrupted or missin... shows in JAF. at first i flash with LinsP 1.. with V.51.1.002 after flash it shows V.51.1.001, i want LinsP2 , and i flashed with all V.51...002 files . like core, rofs. bt now it showing file missing or corrupted.. plz help Quote
LRajesh555 Posted December 4, 2012 Report Posted December 4, 2012 hello tiitinboss bro.. first of all ++1 for your cfw.. it looks amazing.. as i am using RM-356 v60 n the cfw files are meant for lower version.. i tried to flash with your rofs2 & v60 core but end up with a bricked phone.. so please provide the updated links for RM-356 v60.0.003.. or provide some tutorial for porting it to v60.. +1 for help Use Binh24 v60 core and Linspirate v2 rofs2 for 5800. And flash using This Method. Quote
LRajesh555 Posted December 4, 2012 Report Posted December 4, 2012 please help flash files are corrupted or missin... shows in JAF. at first i flash with LinsP 1.. with V.51.1.002 after flash it shows V.51.1.001, i want LinsP2 , and i flashed with all V.51...002 files . like core, rofs. bt now it showing file missing or corrupted.. plz help Use LPv2 rofs2 for your phone and v51 latest core by Binh24 to flash your phone. Don't use 'use ini' method. Try to flash with This Method. Quote
respo Posted December 4, 2012 Report Posted December 4, 2012 Flash success!!!!!!!! Awesome..... but i can't edit photo or video.. but i need this... is it removed from LP2.1 ??? plz help me i need that........... Quote
LRajesh555 Posted December 5, 2012 Report Posted December 5, 2012 Flash success!!!!!!!! Awesome..... but i can't edit photo or video.. but i need this... is it removed from LP2.1 ??? plz help me i need that........... http://forum.gizmolord.com/symbian-s60v5/i%27ve-lost-photo-and-video-editor-apps-after-flash-in-5233/msg84723/#msg84723 Quote
I1Daniel Posted December 5, 2012 Report Posted December 5, 2012 hi there,can someone give me working core links for rm-356 v60.0.003?please helm me! Quote
navratn123 Posted December 5, 2012 Report Posted December 5, 2012 hi there,can someone give me working core links for rm-356 v60.0.003?please helm me! download Skyfire Redefined Core.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.