cell_king Posted November 13, 2011 Report Share Posted November 13, 2011 Hey there many of us using jaf made mistake while flashing thus making our phone dead resulting into no solution but heading towards customer care for repair !!! Same also happened to me.But after certain hit and trial i got something new which i found interesting and did'nt find on this forum!!!(Dead phone means what i am refering here is that after flashing when pressing the power button the phn neither starts nor make any vibration) I just followed the simple steps when my phone became dead:- 1) used my original firmwares for flashing. 2) flashing procedure was same(u can find easily on dis forum) 3) just before flashing tick on "factory set" which is just above downgrade chk box(but dont tick downgrade). 4) Did flashing and got my phn back. This was my personal experience which i shared here. Hope u ol liked it. If there are any mistakes plz clarify them here!!! Quote Link to comment Share on other sites More sharing options...
♥Nik007rock♥ Posted November 13, 2011 Report Share Posted November 13, 2011 yup if anything goes wrong u can get your phone back anytime by just flashing with original firmware files Quote Link to comment Share on other sites More sharing options...
Guest prayaas1998 Posted November 13, 2011 Report Share Posted November 13, 2011 What if the phone refuses to boot up? I mean if it is completely dead, will this work? Anyone one who wants to try: Disconnect phone while flashing process is under progress. Then use this method. Quote Link to comment Share on other sites More sharing options...
cell_king Posted November 13, 2011 Author Report Share Posted November 13, 2011 What if the phone refuses to boot up? I mean if it is completely dead, will this work? Anyone one who wants to try: Disconnect phone while flashing process is under progress. Then use this method.yes this will work. same thing happend to me which u mentiond 2 try !!! Quote Link to comment Share on other sites More sharing options...
♥Nik007rock♥ Posted November 13, 2011 Report Share Posted November 13, 2011 yup it will work coz once while flashing my lappy went out of battery but when i got power supply i flashed with no problem!! just remember one thing don't use lower version core that's all :) Quote Link to comment Share on other sites More sharing options...
Guest prayaas1998 Posted November 14, 2011 Report Share Posted November 14, 2011 It's a really good thing! Now I can flash anything without being worried! Quote Link to comment Share on other sites More sharing options...
shashwat Posted November 14, 2011 Report Share Posted November 14, 2011 i bricked my phone tens of times and sometimes also by using lower core, but it always comes back, figthing like a soldier btw, nice tutorial,+1 Quote Link to comment Share on other sites More sharing options...
farazejaz Posted November 14, 2011 Report Share Posted November 14, 2011 i bricked my phone tens of times and sometimes also by using lower core, but it always comes back, figthing like a soldier btw, nice tutorial,+1 hehe another answer to my questions can u kill your phone by list:D, my last question answered in no was, if flashing is interrupted by power cut, mine did not die ,flashed normally in next attempt, and i think we should have a guide of you cannot kill your phone by ............... Quote Link to comment Share on other sites More sharing options...
shubham926 Posted January 3, 2012 Report Share Posted January 3, 2012 bro worked for me +1 for you Quote Link to comment Share on other sites More sharing options...
jinxslave Posted January 22, 2012 Report Share Posted January 22, 2012 +1 bro. The best tutorial i have eve seen. Thank you very much !!! Quote Link to comment Share on other sites More sharing options...
Die2mrw007 Posted April 21, 2012 Report Share Posted April 21, 2012 Great tutorial bro +1 for the share ! Quote Link to comment Share on other sites More sharing options...
charan12999 Posted April 28, 2012 Report Share Posted April 28, 2012 ?good post? nice one dude but i would prefer to use phoenix to get back dead phones Quote Link to comment Share on other sites More sharing options...
Ajithku Posted May 11, 2012 Report Share Posted May 11, 2012 Nice share...i recovered my 5230 many times Quote Link to comment Share on other sites More sharing options...
rahul.mathur.10792 Posted May 19, 2012 Report Share Posted May 19, 2012 hEY GUYS..... i flashed my phone months ago and i badly bricked it, my 5530 was'nt booting up... i had to get the boot ic replaced this is my second time,,, i just hope that it will be safe this time Quote Link to comment Share on other sites More sharing options...
chetan Posted May 21, 2012 Report Share Posted May 21, 2012 will it work on 5130xm.....? as its completely died...... Quote Link to comment Share on other sites More sharing options...
LRajesh555 Posted May 21, 2012 Report Share Posted May 21, 2012 will it work on 5130xm.....? as its completely died...... try phoenix .. Quote Link to comment Share on other sites More sharing options...
Die2mrw007 Posted May 21, 2012 Report Share Posted May 21, 2012 will it work on 5130xm.....? as its completely died......JAF is better for s40 devices....You can also try phoenix Quote Link to comment Share on other sites More sharing options...
chetan Posted May 22, 2012 Report Share Posted May 22, 2012 in phoenix some error comes .... in jaf it says phone not in cmt flash mode..... wat to do .. Quote Link to comment Share on other sites More sharing options...
Die2mrw007 Posted May 22, 2012 Report Share Posted May 22, 2012 in phoenix some error comes .... in jaf it says phone not in cmt flash mode..... wat to do .. do it like 3-4 times....the drivers need to be installed....if its Windows7 PC, then it will download and install the parent flash driver automatically from internet! Quote Link to comment Share on other sites More sharing options...
chetan Posted May 22, 2012 Report Share Posted May 22, 2012 it got download n instaled.. also.......but same prblm.... Quote Link to comment Share on other sites More sharing options...
Die2mrw007 Posted May 22, 2012 Report Share Posted May 22, 2012 it got download n instaled.. also.......but same prblm....If you could connect TeamViewer, I could do this process for you live. I guess, you are doing something wrong. Quote Link to comment Share on other sites More sharing options...
gammalyze Posted May 24, 2012 Report Share Posted May 24, 2012 from where can i get those ofw files? Quote Link to comment Share on other sites More sharing options...
chetan Posted May 24, 2012 Report Share Posted May 24, 2012 If you could connect TeamViewer, I could do this process for you live. I guess, you are doing something wrong. i'll take ur help soon... as my laptop is gvn fr repair..... as soon as it gets repaird i'll contct u ... Quote Link to comment Share on other sites More sharing options...
chetan Posted May 25, 2012 Report Share Posted May 25, 2012 guys.... i here is my log..... of flashing.... my 5130xm.. its says phone not in cmt mode........ n pic about to selection in jaf.... any mistake den do tell..... JAF version 1.98.62 Detected PKEY: 90009B6C Card life counter: 99.99% P-key nokia module version 01.02 FBUS INTERFACE NOT CONNECTED!!! USB Cable Driver version: 7.1.69.0 Changing mode...Done! FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Searching for JAF saved location of ini... Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\ Searching for default location of ini... Checking path: \Products\RM-495\ Searching for JAF saved location of ini... Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\ Scanning ini files... Searching for default location of ini... Checking path: \Products\RM-495\ Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\ FILES SET FOR FLASHING: MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.mcusw PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.ppm_mh CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.image_CTV_INDIA_HINDI_red APE Variant file: NONE Languages in ppm: English,Hindi,Sinhalese Detected P-KEY: 90009B6C P-key nokia module version 01.02 Init usb communication... PRESS POWER ON NOW! Searching for phone...Found Sending RAW loader... Using 06.02.002 Elf2flash 09.07.000 CMT RAW loader... Patching RAW boot step1... Patching RAW boot step3... Sending RAW Loader... ...................Loader Sent! Stage 2 starting...............................................................................Loader Sent! Stage 3 starting..................Phone prepared OK! Waiting for the phone to boot... Searching for phone... Phone failed to boot in flash mode CMT... Quote Link to comment Share on other sites More sharing options...
chetan Posted May 25, 2012 Report Share Posted May 25, 2012 If you could connect TeamViewer, I could do this process for you live. I guess, you are doing something wrong. dude r u free now... i got my laptop back.... n team viewer is waiting for u...... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.