Ajithku Posted April 18, 2012 Report Share Posted April 18, 2012 Ever bricked your phone by downgradingor flashing with wrong CFW?? Here is how you can revive your phone sitting at home without any problem. 1) Follow the same methods that you usefor flashing. 2) Just before flashing select the SOFT. RESET mode as shown in the image below.http://forum.gizmolord.com/index.php?action=dlattach;topic=4195.0;attach=9700 Wallah!!! Your phone is again back to normal. Enjoy!!!!! If this help please add 1 for me. Quote Link to comment Share on other sites More sharing options...
devilhunter47 Posted April 18, 2012 Report Share Posted April 18, 2012 I think the phone can be recovered by flashing with original FW files..i have done it and dont think there is any need for soft reset:) Quote Link to comment Share on other sites More sharing options...
Tristar Posted April 18, 2012 Report Share Posted April 18, 2012 I think the phone can be recovered by flashing with original FW files..i have done it and dont think there is any need for soft reset:) i agree, even i just reflash with ofw and it gets recovered. Then flash back to the cfw still a nice share Quote Link to comment Share on other sites More sharing options...
Die2mrw007 Posted April 18, 2012 Report Share Posted April 18, 2012 Nice share buddy +1 Quote Link to comment Share on other sites More sharing options...
rinku9999 Posted April 19, 2012 Report Share Posted April 19, 2012 nice share +1 Quote Link to comment Share on other sites More sharing options...
densk89 Posted April 20, 2012 Report Share Posted April 20, 2012 i just revive my phone with the updated core. Never downgrade your core when flashing Quote Link to comment Share on other sites More sharing options...
cell_king Posted April 21, 2012 Report Share Posted April 21, 2012 There is no need for soft reset mate u can use your original fw files to revive ur phn !!! Here forum.gizmolord.com/index.php?topic=1084.0 Quote Link to comment Share on other sites More sharing options...
nasranwaar Posted January 5, 2013 Report Share Posted January 5, 2013 i flashed my phone for 4th time and now it's dead and this is the status log i get while reviving it help me!!! JAF version 1.98.62 Detected PKEY: 9000AAC9 Card life counter: 99.99% P-key nokia module version 01.02 FBUS INTERFACE NOT CONNECTED!!! USB Cable Driver version: 7.1.92.0 Changing mode...Done! FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Backing up CRT... Detected P-KEY: 9000AAC9 P-key nokia module version 01.02 Init usb communication... Failed to backup CRT... Searching for JAF saved location of ini... Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\ Searching for default location of ini... Checking path: \Products\RM-625\ Searching for JAF saved location of ini... Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\ Scanning ini files... Searching for default location of ini... Checking path: \Products\RM-625\ Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\ FILES SET FOR FLASHING: MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_51.9.002_prd.core.C00 PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_51.9.002_prd.rofs2.V25 CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_51.9.002_C01_prd.rofs3.fpsx APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM625_51.1.002_000_001_U002.uda.fpsx Languages in ppm: English,Vietnamese,Tagalog,Chinese Simpl,Chinese Trad Detected P-KEY: 9000AAC9 P-key nokia module version 01.02 Init usb communication... PRESS POWER ON NOW! Searching for phone...Found Sending RAW loader... Using 009.012.005 Elf2flash 09.11.000 CMT RAW loader... Patching RAW boot step1... Patching RAW boot step3... Sending RAW Loader... ....................Loader Sent! Stage 2 starting............PUBKEYS already sent... PUBKEYS already sent... ........Phone prepared OK! Waiting for the phone to boot... Searching for phone... Status byte: 8000 Selecting CMT flash... Result: 0000 Phone is in flash mode... CMT blocks: 611, APE blocks: 0 Erasing cmt... Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_51.9.002_prd.core.C00... Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000 Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000 Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000 Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000 Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000 Partition result: 0014 Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_51.9.002_prd.rofs2.V25... Erasing cmt zone 06DE0000 - 0915FFFF ... Erase result: 0000 Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_51.9.002_C01_prd.rofs3.fpsx... Erasing cmt zone 09160000 - 09E5FFFF ... Erase result: 0000 Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM625_51.1.002_000_001_U002.uda.fpsx... Erasing cmt zone 09E60000 - 0F47FFFF ... Erase result: 0000 Send CMT CFG... Writing cmt... Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_51.9.002_prd.core.C00... Sending CMT HASH for ADA Sending CMT HASH for KEYS Sending CMT HASH for PRIMAPP Sending CMT HASH for RAP3NAND Sending CMT HASH for PASUBTOC cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending... Sending CMT HASH for SOS*UPDAPP Sending CMT HASH for SOS*ENO Sending CMT HASH for SOS*DSP0 Sending CMT HASH for SOS*ISASW Sending CMT HASH for SOS+CORE Sending CMT HASH for SOS+ROFS1 Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_51.9.002_prd.rofs2.V25... Sending CMT HASH for SOS+ROFS2 Write result 27: 1701 Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_51.9.002_C01_prd.rofs3.fpsx... Sending CMT HASH for SOS+ROFS3 Write result 27: 1701 Processing C:\Program Files\Nokia\Phoenix\Products\RM-625\RM625_51.1.002_000_001_U002.uda.fpsx... Rebooting... Finishing CMT session... Restarting CMT... Pooling phone... Phone not found... Quote Link to comment Share on other sites More sharing options...
navratn123 Posted January 6, 2013 Report Share Posted January 6, 2013 i flashed my phone for 4th time and now it's dead and this is the status log i get while reviving it help me!!! JAF version 1.98.62 Detected PKEY: 9000AAC9 Card life counter: 99.99% P-key nokia module version 01.02 FBUS INTERFACE NOT CONNECTED!!! USB Cable Driver version: 7.1.92.0 Changing mode...Done! ---------------------------------------------------------------------------------------------------------------------------- Restarting CMT... Pooling phone... Phone not found... try the latest core or download latest firmware of you phone then flash again..... Quote Link to comment Share on other sites More sharing options...
Amarrrtya Posted January 10, 2013 Report Share Posted January 10, 2013 can this method revive my dead rm-495 5130 xm ??? Quote Link to comment Share on other sites More sharing options...
navratn123 Posted January 10, 2013 Report Share Posted January 10, 2013 can this method revive my dead rm-495 5130 xm ??? try maybe revive again.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.