Belle HS Ported to S60v5 | Free Ram : 50 MB | GizmoLord Exclusive Project.

shivam94 · March 14, 2012

hey wats the difference within this releasE? :?

earlier in the night, there was some bug which is now corrected at 3:15 am IST today

Nikhil · March 14, 2012

earlier in the night, there was some bug which is now corrected at 3:15 am IST today

wat bug?

i mean any improvments in new1?

shivam94 · March 14, 2012

wat bug?
i mean any improvments in new1?

with the earlier version 2 i,e the non updated one, there was some bug with starter files and the phone did not boot. That's why .

The menu button now opens jbaklist.

Nikhil · March 14, 2012

with the earlier version 2 i,e the non updated one, there was some bug with starter files and the phone did not boot. That's why .

The menu button now opens jbaklist.

strange the previous one workd for me

(bt i m not currently using any )

pavan061994 · March 14, 2012

xcellentt job done by shivam,,lrajesh.....nd sajrockz..... Btw... Whats the startup time in this as per our methods lists.......???

shivam94 · March 14, 2012

xcellentt job done by shivam,,lrajesh.....nd sajrockz.....
Btw... Whats the startup time in this as per our methods lists.......???

The new version 2 takes on first boot 1 min(usual)+30 sec(for installing belleshell+jbtakman+dialpad). Then onwards about 1 min to load belle shell completely.

pavan061994 · March 14, 2012

The new version 2 takes on first boot 1 min(usual)+30 sec(for installing belleshell+jbtakman+dialpad). Then onwards about 1 min to load belle shell completely.

k......so..itz terminable as 1st method......???

What shud i make changes on 1 st post ..????

Delete methods andd put ths....or both.....

shivam94 · March 14, 2012

Pavan, just copy and paste my post (only version 2) on first post

shivam94 · March 14, 2012

Other Methods :

Methods-1 :

Steps to set Belle Shell HS as default without Flashing UDA and without including QT in ROFS2

New and updated User Guide (by shivam94 with ankursmooth's tips)

1) Install QT Package, BelleShell, Dialer Pad , jbtaskman (tick autostart option during installation) on C:/ drive of your phone.

2) Open Jbtaskman app, go to options, settings, program settings, and put cross against following options:

Show info panel

show menu

show desktop

show UID

show hidden apps

close w\o confirmation and press ok.

3) Again in jbtaskman, go to settings, key menu settings, and change the settings to screenshot1 shown below

http://forum.gizmolord.com/index.php?action=dlattach;topic=2764.0;attach=6021;image

4) Then go to ext settings of jbstask, and under Desktop UID change to 0x200393ce.

5) Now you should see all processes running in jbtask main window. Now click on Homescreen process, click on options, program rules and put cross across autostart on boot, Kill On Startup Save changes. Now similarly click on menu process in jbtask main window and put cross across kill after boot.

6) Run belle shell on your phone. Now go to jbak taskman, select belle shell, go to options, settings,program rules and set to autostart.

7) Save changes and shut down your phone.

8) Extract Rofs2 by using NFEstd 0.3 Tool or Nokia Cooker (Recommended).

9) Download Replacehs app from Attachment. Extract the app via extsis and add to rofs2.

Open Starter_Arm.rsc using Resedit and Edit the line "Z:\sys\bin\ailaunch.exe" to your directory link you noted above in step 2 i.e. "z:\sys\bin\repla.exe". Click on options menu of resedit and save changes.

10) Open Starter_non_critical.rsc using Resedit and Edit the line "Z:\sys\bin\vcommandmanager.exe" TO "Z:\sys\bin\ailaunch.exe".Click on options menu of resedit

and save changes.

11) Repack rofs2 and flash phone WITHOUT UDA.

12) Now your phone will start with belle shell as default hs and without any network problem. now pressing menu key will show list of all installed apps on your phone. Also red key working successfully

NOTE:

Give your phone 2 minutes to load properly. Don't open any app until then.
disable killme killing on autostart.
DON'T use *#7370#
after installing any app, the menu of belle shell does not refresh automatically, for that, go to belle shell main screen and press the 1st button from right(i.e icon to right of dialer icon) and press exit belle shell. Then belle shell will automatically restart and with updated menu.
You can use all qt apps simultaneously without any problems.
To get more ram at startup. See my post:

7. To go back to default hs, use jbtaskman and terminate Belle Shell. Then Press Menu key and run homescreen(ailaunch.exe) Process.You will get back default hs.

8. Any doubts, pls reply at this thread.(credits to ankursmooth for recommending change)

For FAQ see here:

1) After installing app, menu doesnot update?

Ans:- For that long press middle button to show open apps,

Then long press on belle shell app icon , then you will get 2 options, 1.open, 2.exit. Press exit. The belle shell will close but automatically restart with menu updated.

2) Is there need to install dial pad ?

Ans:- Yes. Without installing this .sis, dialer not opening via belle hs

3)Can I use *#7370# to reformat my phone?

Ans:- Then U have to Integrate QT and Belleshell hs into rofs2, and modify Starter_Arm.rsc ,entry bilaunch to z:\sys\bin\bilaunch.exe. Save and then rename the belleshell.exe in rofs2\sys\bin to bilaunch.exe. Follow The Following:

But If U dont Want To Format then U Dont need To Integrate QT and Shell In ROFS2 UDA.

Method-2:

Steps to set belle shell hs as default Without Flashing UDA and Without Including QT in ROFS2

For Those Who Wants Belle Shell Unterminable (Free RAM:45MB) And Faster Startup

1) Install QT, BelleShell, Dialer Pad on your phone in C:/ drive.

2) Go To C:\sys\bin of your phone and rename Belleshell.exe to belle.exe.

NOTE: Please note down the directory link properly i.e. C:\SYS\BIN\belleshell.exe

(This is important as everything is case sensitive in rsc file)

3) Extract Rofs2 by using nfestd or nokia cooker(Recommended).

4)Extract ReplaceHS app New via Extsis and Add to Rofs2 ...

5) Open Starter_Arm.rsc using Resedit and Edit the line "Z:\sys\bin\ailaunch.exe" to"C:\SYS\BIN\belle.exe."

6) Also Replace Z:\sys\bin\matrixmenu.exe (for c6 ports) or Z:\sys\bin\menu3.exe(for 5800 ofw) entry in Starter_arm.rsc OR starter_non_critical.rsc and change to Z:\sys\bin\repla.exe OR Z:\sys\bin\repla.exe. Then click Save and Then options Menu in resedit and click save.

7) Open Starter_non_critical.rsc using Resedit and Edit the line "Z:\sys\bin\vcommandmanager.exe" TO "Z:\sys\bin\ailaunch.exe".Click on options menu of resedit and save changes.

8) Save the changes and repack your Rofs2

9) Flash your rofs2 with JAF.

10) Your phone will start with Belle HS as Primary Homescreen.

11) You May Use a Red Key App And Jbak Intead Of Replace Hs. Then U may Skip Step (5)

FAQ:- Same As Above

Method-3:

Who will Integrate QT and Shell in ROFS2 And UDA which Are Formatting via *#7370# & Belle HS Will Be Permanently Integrated:

As gourav_2000 method is from Z:drive, this is for Those Who are willing to Integrate QT and Shell In their ROFS2.

1) Install Belleshell on your phone in e:/ drive.

2) Start belleshell on your phone and after loading, exit belleshell.

3)Go to e:\private\200393c of your phone (via filebrowser,xplore) and Copy userconfig.sqlite to your E:\(transfer this userconfig.sqlite to your pc).

4) Extract Rofs2 by using Nfestd or Nokia cooker.

5) Extract Replace HS App New via Extsis and add to rofs2.

6) Extract belleshell app via extsis and copy to rofs2.

Go to rofs2\sys\bin and rename belleshell.exe to bilaunch.exe

7) Open Starter_Arm.rsc using Resedit and edit the line Z:\sys\bin\ailaunch.exe to Z:\sys\bin\bilaunch.exe &

8) Edit Z:\sys\bin\matrixmenu.exe (for c6 ports) or Z:\sys\bin\menu3.exe(for 5800 ofw) entry in Starter_arm.rsc OR starter_non_critical.rsc and change to Z:\sys\bin\repla.exe

9) Open Starter_non_critical.rsc using Resedit and Edit the line "Z:\sys\bin\vcommandmanager.exe" TO "Z:\sys\bin\ailaunch.exe".Click on options menu of resedit and save changes. You May Use aRed Key App And Jbak Intead Of Replace HS. Then U may Skip Step [6,7,8]

10) Open QT in core package, copy contents to your rofs2.

11) Extract Dialpad.sis via extsis and copy contents to your rofs2.

12) Save the changes and repack your rofs2.

13) Open your .Uda with Nokia cooker and add the contents of UDA folder of QT in Core Package to your Uda.Repack your uda.

14) Uninstall QT and Belle Shell Before Flashing. As it will Cause Lag Of Duplication!!!

15) Open JAF, tick manual flash, dead usb, normal mode, use ini. Untick CRT 308

16) Flash your core, new rofs2 , rofs3(If Present), new uda with JAF

17) Your phone will start with belle shell as primary hs.

NOTE: 1) Use killme/Jbak Taskmgr to terminate homescreen process.(ailaunch.exe)

2) For Menu Button:-

After installing jbak,Goto Jbak /Options/settings, key menu settings.
Then a window will open in jbak and the first op/ion under 'in system' category, change to program list and press ok.
Now you will see list of installed apps with search bar below.

Note: The homescreen terminates and will not restart and thus saving 5 MB Ram.

FAQ:

1) After installing new apps, menu doesnot update?

Ans. For that long press middle button to show open apps, Then long press on belle shell app icon , then you will get 2 options, 1)open, 2) exit. Press exit. The belle shell will close but automatically restart with menu updated

2) Can I use *#7370# to reformat my phone?

Ans:- Ya, Sure.

The Common Step in All Methods:Open Starter_non_critical.rsc using Resedit and Edit the line Z:\sys\bin\vcommandmanager.exe" TO "Z:\sys\bin\ailaunch.exe". Click on options menu of resedit and save changes.

[Guide And Files]:

How to integrate Qt in Rofs2 and UDA. If you are flashing with UDA and Want to Integrate QT in ur CFW/OFW:

By mr_gourav2000 & die2mrw007

Here we Present QT in your Z drive or ROFS2:

Just try it and give your feedback.

Add to rofs2

Link: Click here

pavan061994 · March 14, 2012

Pavan, just copy and paste my post (only version 2) on first post

k.... Give link here.... I m on cell.but will go on pc in half an hour.......

Btw...this contains starter modding or just jbak has got all set....???

CrackUC · March 14, 2012

Other Methods :

Methods-1 :
Steps to set Belle Shell HS as default without Flashing UDA and without including QT in ROFS2
New and updated User Guide (by shivam94 with ankursmooth's tips)

1) Install QT Package, BelleShell, Dialer Pad , jbtaskman (tick autostart option during installation) on C:/ drive of your phone.

2) Open Jbtaskman app, go to options, settings, program settings, and put cross against following options:
Show info panel
show menu
show desktop
show UID
show hidden apps
close w\o confirmation and press ok.

3) Again in jbtaskman, go to settings, key menu settings, and change the settings to screenshot1 shown below
http://forum.gizmolord.com/index.php?action=dlattach;topic=2764.0;attach=6021;image

4) Then go to ext settings of jbstask, and under Desktop UID change to 0x200393ce.

5) Now you should see all processes running in jbtask main window. Now click on Homescreen process, click on options, program rules and put cross across autostart on boot, Kill On Startup Save changes. Now similarly click on menu process in jbtask main window and put cross across kill after boot.

6) Run belle shell on your phone. Now go to jbak taskman, select belle shell, go to options, settings,program rules and set to autostart.

7) Save changes and shut down your phone.

8) Extract Rofs2 by using NFEstd 0.3 Tool or Nokia Cooker (Recommended).

9) Download Replacehs app from Attachment. Extract the app via extsis and add to rofs2.
Open Starter_Arm.rsc using Resedit and Edit the line "Z:\sys\bin\ailaunch.exe" to your directory link you noted above in step 2 i.e. "z:\sys\bin\repla.exe". Click on options menu of resedit and save changes.
10) Open Starter_non_critical.rsc using Resedit and Edit the line "Z:\sys\bin\vcommandmanager.exe" TO "Z:\sys\bin\ailaunch.exe".Click on options menu of resedit
and save changes.

11) Repack rofs2 and flash phone WITHOUT UDA.

12) Now your phone will start with belle shell as default hs and without any network problem. now pressing menu key will show list of all installed apps on your phone. Also red key working successfully

NOTE:
Give your phone 2 minutes to load properly. Don't open any app until then.
disable killme killing on autostart.
DON'T use *#7370#
after installing any app, the menu of belle shell does not refresh automatically, for that, go to belle shell main screen and press the 1st button from right(i.e icon to right of dialer icon) and press exit belle shell. Then belle shell will automatically restart and with updated menu.
You can use all qt apps simultaneously without any problems.
To get more ram at startup. See my post:
http://forum.gizmolord.com/index.php?topic=2764.msg36128#msg36128
http://forum.gizmolord.com/index.php?topic=2764.msg36131#msg36131
7. To go back to default hs, use jbtaskman and terminate Belle Shell. Then Press Menu key and run homescreen(ailaunch.exe) Process.You will get back default hs.
8. Any doubts, pls reply at this thread.(credits to ankursmooth for recommending change)

For FAQ see here:
1) After installing app, menu doesnot update?
Ans:- For that long press middle button to show open apps,
Then long press on belle shell app icon , then you will get 2 options, 1.open, 2.exit. Press exit. The belle shell will close but automatically restart with menu updated.
2) Is there need to install dial pad ?
Ans:- Yes. Without installing this .sis, dialer not opening via belle hs
3)Can I use *#7370# to reformat my phone?
Ans:- Then U have to Integrate QT and Belleshell hs into rofs2, and modify Starter_Arm.rsc ,entry bilaunch to z:\sys\bin\bilaunch.exe. Save and then rename the belleshell.exe in rofs2\sys\bin to bilaunch.exe. Follow The Following:
But If U dont Want To Format then U Dont need To Integrate QT and Shell In ROFS2 UDA.

Method-2:
Steps to set belle shell hs as default Without Flashing UDA and Without Including QT in ROFS2
For Those Who Wants Belle Shell Unterminable (Free RAM:45MB) And Faster Startup

1) Install QT, BelleShell, Dialer Pad on your phone in C:/ drive.

2) Go To C:\sys\bin of your phone and rename Belleshell.exe to belle.exe.
NOTE: Please note down the directory link properly i.e. C:\SYS\BIN\belleshell.exe
(This is important as everything is case sensitive in rsc file)

3) Extract Rofs2 by using nfestd or nokia cooker(Recommended).

4)Extract ReplaceHS app New via Extsis and Add to Rofs2 ...

5) Open Starter_Arm.rsc using Resedit and Edit the line "Z:\sys\bin\ailaunch.exe" to"C:\SYS\BIN\belle.exe."

6) Also Replace Z:\sys\bin\matrixmenu.exe (for c6 ports) or Z:\sys\bin\menu3.exe(for 5800 ofw) entry in Starter_arm.rsc OR starter_non_critical.rsc and change to Z:\sys\bin\repla.exe OR Z:\sys\bin\repla.exe. Then click Save and Then options Menu in resedit and click save.

7) Open Starter_non_critical.rsc using Resedit and Edit the line "Z:\sys\bin\vcommandmanager.exe" TO "Z:\sys\bin\ailaunch.exe".Click on options menu of resedit and save changes.

8) Save the changes and repack your Rofs2

9) Flash your rofs2 with JAF.

10) Your phone will start with Belle HS as Primary Homescreen.

11) You May Use a Red Key App And Jbak Intead Of Replace Hs. Then U may Skip Step (5)

FAQ:- Same As Above

Method-3:
Who will Integrate QT and Shell in ROFS2 And UDA which Are Formatting via *#7370# & Belle HS Will Be Permanently Integrated:
As gourav_2000 method is from Z:drive, this is for Those Who are willing to Integrate QT and Shell In their ROFS2.

1) Install Belleshell on your phone in e:/ drive.

2) Start belleshell on your phone and after loading, exit belleshell.

3)Go to e:\private\200393c of your phone (via filebrowser,xplore) and Copy userconfig.sqlite to your E:\(transfer this userconfig.sqlite to your pc).

4) Extract Rofs2 by using Nfestd or Nokia cooker.

5) Extract Replace HS App New via Extsis and add to rofs2.

6) Extract belleshell app via extsis and copy to rofs2.
Go to rofs2\sys\bin and rename belleshell.exe to bilaunch.exe

7) Open Starter_Arm.rsc using Resedit and edit the line Z:\sys\bin\ailaunch.exe to Z:\sys\bin\bilaunch.exe &

8) Edit Z:\sys\bin\matrixmenu.exe (for c6 ports) or Z:\sys\bin\menu3.exe(for 5800 ofw) entry in Starter_arm.rsc OR starter_non_critical.rsc and change to Z:\sys\bin\repla.exe

9) Open Starter_non_critical.rsc using Resedit and Edit the line "Z:\sys\bin\vcommandmanager.exe" TO "Z:\sys\bin\ailaunch.exe".Click on options menu of resedit and save changes. You May Use aRed Key App And Jbak Intead Of Replace HS. Then U may Skip Step [6,7,8]

10) Open QT in core package, copy contents to your rofs2.

11) Extract Dialpad.sis via extsis and copy contents to your rofs2.

12) Save the changes and repack your rofs2.

13) Open your .Uda with Nokia cooker and add the contents of UDA folder of QT in Core Package to your Uda.Repack your uda.

14) Uninstall QT and Belle Shell Before Flashing. As it will Cause Lag Of Duplication!!!

15) Open JAF, tick manual flash, dead usb, normal mode, use ini. Untick CRT 308

16) Flash your core, new rofs2 , rofs3(If Present), new uda with JAF

17) Your phone will start with belle shell as primary hs.

NOTE: 1) Use killme/Jbak Taskmgr to terminate homescreen process.(ailaunch.exe)
2) For Menu Button:-

After installing jbak,Goto Jbak /Options/settings, key menu settings.
Then a window will open in jbak and the first op/ion under 'in system' category, change to program list and press ok.
Now you will see list of installed apps with search bar below.
Note: The homescreen terminates and will not restart and thus saving 5 MB Ram.

FAQ:
1) After installing new apps, menu doesnot update?
Ans. For that long press middle button to show open apps, Then long press on belle shell app icon , then you will get 2 options, 1)open, 2) exit. Press exit. The belle shell will close but automatically restart with menu updated

2) Can I use *#7370# to reformat my phone?
Ans:- Ya, Sure.

The Common Step in All Methods:Open Starter_non_critical.rsc using Resedit and Edit the line Z:\sys\bin\vcommandmanager.exe" TO "Z:\sys\bin\ailaunch.exe". Click on options menu of resedit and save changes.

[Guide And Files]:
How to integrate Qt in Rofs2 and UDA. If you are flashing with UDA and Want to Integrate QT in ur CFW/OFW:
By mr_gourav2000 & die2mrw007
Here we Present QT in your Z drive or ROFS2:
Just try it and give your feedback.
Add to rofs2
Link: Click here

shall i go ahead to create a thread for that..???it would take minutes for me??

pavan061994 · March 14, 2012

shall i go ahead to create a thread for that..???it would take minutes for me??

no....dont create any thread becoz this is part of this thread...and developement thread....

Thx....

shivam94 · March 14, 2012

k.... Give link here.... I m on cell.but will go on pc in half an hour.......
Btw...this contains starter modding or just jbak has got all set....???

version 2 link here : http://forum.gizmolord.com/index.php?topic=2764.msg39790#msg39790

shall i go ahead to create a thread for that..???it would take minutes for me??

Thanks bro

. But it is not required for this as these are other methods

sajrockz · March 14, 2012

Thanks sajrockz for testing it once again

thanks :)

sajrockz · March 14, 2012

xcellentt job done by shivam,,lrajesh.....nd sajrockz.....
Btw... Whats the startup time in this as per our methods lists.......???

thanks pavan... with the new release the startup time is 15 to 20 seconds.. maybe more.. my fw is modified blaze ultimate

shivam94 · March 14, 2012

hey pavan,dont forget to mention that n97 ports won't work. @sajrockz. Please check if your photo app is working

sajrockz · March 14, 2012

working photo app

pavan061994 · March 14, 2012

hey pavan,dont forget to mention that n97 ports won't work.
@sajrockz. Please check if your photo app is working

Means.....this is not for N97 Ports......

Explain me all :-

shivam94 · March 14, 2012

Means.....this is not for N97 Ports......

Explain me all :-

pavan, yesterday mayankgarg reported that it doesnot work well with n97 port. So I need the original starter files of n97 fw in order to make it work with n97. please upload your starter files and then it shall work for n97 ports too.

Die2mrw007 · March 14, 2012

I have split the Nokia FW cleaner guide by shivam as separate thread: http://forum.gizmolord.com/index.php?topic=3707.0

mayankgarg · March 14, 2012

pavan, yesterday mayankgarg reported that it doesnot work well with n97 port. So I need the original starter files of n97 fw in order to make it work with n97. please upload your starter files and then it shall work for n97 ports too.

yup it didn't worked for me...and when i tried with blaze ultimate it worked fine...!!

shivam94 · March 14, 2012

I have split the Nokia FW cleaner guide by shivam as separate thread: http://forum.gizmolord.com/index.php?topic=3707.0

thanks bro

pavan061994 · March 14, 2012

yup it didn't worked for me...and when i tried with blaze ultimate it worked fine...!!

how can be possible?????

Which fw u use???

devilyazdan · March 14, 2012

how can be possible?????
Which fw u use???

Blaze is on OFW.

sajrockz · March 14, 2012

blaze ultimate is an amazing ofw based cfw.. belle shell works fine with it if u do it right

Sign In

Belle HS Ported to S60v5 | Free Ram : 50 MB | GizmoLord Exclusive Project.

Recommended Posts

shivam94

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Posted Images

Nikhil

shivam94

Nikhil

pavan061994

shivam94

pavan061994

shivam94

shivam94

pavan061994

CrackUC

pavan061994

shivam94

sajrockz

sajrockz

shivam94

sajrockz

pavan061994

shivam94

Die2mrw007

mayankgarg

shivam94

pavan061994

devilyazdan

sajrockz

Join the conversation

Browse