shashwat Posted October 16, 2011 Report Posted October 16, 2011 do it manually, if anythng doesn't work. Manual method always works Quote
crnair Posted October 16, 2011 Report Posted October 16, 2011 the location should be C:\Program Files\Nokia\Phoenix\Products\RM-356 paste your cfw files here and make sure nokia pc suite is completely closed from tray As suggested, change the directory and removed pc suite from tray, still the same problem: JAF version 1.98.62 Detected PKEY: 90009699 Card life counter: 99.99% P-key nokia module version 01.02 FBUS INTERFACE NOT CONNECTED!!! USB Cable Driver version: 7.1.45.0 Changing mode...Done! FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Detected P-KEY: 90009699 P-key nokia module version 01.02 Init usb communication... Phone Type: FILES SET FOR FLASHING: MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_52.0.007_prd.core.C0r PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Detected P-KEY: 90009699 P-key nokia module version 01.02 Init usb communication... Phone Type: FILES SET FOR FLASHING: MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_52.0.007_prd.core.C0r PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_52.0.007_prd.rofs2.V01 CNT Flash file: NONE APE Variant file: NONE Languages in ppm: English,French,German,Italian,Spanish,Portuguese Detected P-KEY: 90009699 P-key nokia module version 01.02 Init usb communication... Phone Type: FILES SET FOR FLASHING: MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_52.0.007_prd.core.C0r PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_52.0.007_prd.rofs2.V01 CNT Flash file: NONE APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_52.0.007_026_000_U01.uda.fpsx Languages in ppm: English,French,German,Italian,Spanish,Portuguese Detected P-KEY: 90009699 P-key nokia module version 01.02 Init usb communication... PRESS POWER ON NOW! Searching for phone...Found Error reading phone init data.. Quote
Die2mrw007 Posted October 16, 2011 Author Report Posted October 16, 2011 do it manually, if anythng doesn't work. Manual method always works He is doing manual selection itself... @crnair: Copy paste all the 6 files (or 7, might be) to C:\Program Files\Nokia\Phoenix\Products\RM-356 Tick dead usb, manual flash and normal mode option in jaf untick CMT 308 Tick "Use INI" a selection box would appear...select the phone model check all the three lights glow: MCU, PPM and APE-Variant make sure u connect ur phone in switch off mode (remove the battery and re-insert it) Click "FLash" button in JAF A message would appear as "PRESS POWER ON NOW!....." Just single press the power button of your phone It will work fine Quote
Die2mrw007 Posted October 16, 2011 Author Report Posted October 16, 2011 "Error reading phone init data.." ............................ usually occurs when phone does not go in Flash mode (Boot loader) The phone should not turn on (remove the battery and re-insert it to make sure its actually turned off) If this doesnt work, flash with any other fw or your ofw files from navifirm....and see the result with it do update here whatever the final result is Quote
crnair Posted October 16, 2011 Report Posted October 16, 2011 He is doing manual selection itself... @crnair: Copy paste all the 6 files (or 7, might be) to C:\Program Files\Nokia\Phoenix\Products\RM-356 Tick dead usb, manual flash and normal mode option in jaf untick CMT 308 Tick "Use INI" a selection box would appear...select the phone model check all the three lights glow: MCU, PPM and APE-Variant make sure u connect ur phone in switch off mode (remove the battery and re-insert it) Click "FLash" button in JAF A message would appear as "PRESS POWER ON NOW!....." Just single press the power button of your phone It will work fine Only 6 files r there and when select ini and nokia RM-356 three switches do not glow and the following appears on the screen: JAF version 1.98.62 Detected PKEY: 9000AAC9 Card life counter: 99.99% P-key nokia module version 01.02 FBUS INTERFACE NOT CONNECTED!!! USB Cable Driver version: 7.1.45.0 Changing mode...Done! FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Searching for JAF saved location of ini... Checking path: RM-356\ Searching for default location of ini... Checking path: \Products\RM-356\ Searching for JAF saved location of ini... Checking path: RM*356*.vplRM-356\ No ini files found... FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Quote
Die2mrw007 Posted October 16, 2011 Author Report Posted October 16, 2011 Only 6 files r there and when select ini and nokia RM-356 three switches do not glow and the following appears on the screen: JAF version 1.98.62 Detected PKEY: 9000AAC9 Card life counter: 99.99% P-key nokia module version 01.02 FBUS INTERFACE NOT CONNECTED!!! USB Cable Driver version: 7.1.45.0 Changing mode...Done! FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Searching for JAF saved location of ini... Checking path: RM-356\ Searching for default location of ini... Checking path: \Products\RM-356\ Searching for JAF saved location of ini... Checking path: RM*356*.vplRM-356\ No ini files found... FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE It is because you are not creating the exact path Create folder named Nokia in C:/programs Create folder named Phoenix in C:/programs/Nokia Create folder named Products in C:/programs/Nokia/Phoenix Create folder named RM-356 in C:/programs/Nokia/Phoenix/Products Paste all the 6 files in RM-356 folder created in C:/programs/Nokia/Phoenix/Products Quote
♥Nik007rock♥ Posted October 16, 2011 Report Posted October 16, 2011 also do check the name of files Quote
Die2mrw007 Posted October 16, 2011 Author Report Posted October 16, 2011 also do check the name of files yeah...he need to rename it back the C0r to C00 Quote
crnair Posted October 16, 2011 Report Posted October 16, 2011 yeah...he need to rename it back the C0r to C00 Changed the directory and also file names. Still the same problem. Also tried binh's and resulted with same problem. Earlier when I had flashed your Crystal1 c640, Crystal1 N97 and Rohit's C640 there was no problem. Pl let me know from where I can download JAF? Quote
Die2mrw007 Posted October 16, 2011 Author Report Posted October 16, 2011 Changed the directory and also file names. Still the same problem. Also tried binh's and resulted with same problem. Earlier when I had flashed your Crystal1 c640, Crystal1 N97 and Rohit's C640 there was no problem. Pl let me know from where I can download JAF? Then, its definitely something wrong with your JAF or drivers... Download JAF from here: http://forum.gizmolord.com/custom-firmware-discussions/flashing-with-jaf-(hack-your-phone)/ Quote
♥Nik007rock♥ Posted October 16, 2011 Report Posted October 16, 2011 krystal c6v40? When did he released? Quote
Die2mrw007 Posted October 16, 2011 Author Report Posted October 16, 2011 krystal c6v40? When did he released? I did released it long back...it was my first cfw..and was for 5800 only My second cfw is Krystal^1 N97v30 ...which I released for most of the phone variants Quote
♥Nik007rock♥ Posted October 16, 2011 Report Posted October 16, 2011 hmm now looking forward for krystal^2 Quote
npalanov Posted October 16, 2011 Report Posted October 16, 2011 x6 variant soon. . .within hours need a beta tester for x6 release Can I be a tester? Quote
Die2mrw007 Posted October 17, 2011 Author Report Posted October 17, 2011 binh24 released c6v41 ports for other variants. . . .i recommend his port this time. . .its bug free do try it guys. . Quote
shashwat Posted October 17, 2011 Report Posted October 17, 2011 binh24 released c6v41 ports for other variants. . . .i recommend his port this time. . .its bug free do try it guys. . Yup,its bug free, i tried it in my 5233, and it worked like a charm, but mediabar doesn't work! Quote
Die2mrw007 Posted October 17, 2011 Author Report Posted October 17, 2011 Yup,its bug free, i tried it in my 5233, and it worked like a charm, but mediabar doesn't work! I have the solution for mediabar...I did it in my port and worked fine I will give you the mediabar files...just test it and let me know whether it works for you Quote
shashwat Posted October 17, 2011 Report Posted October 17, 2011 I have the solution for mediabar...I did it in my port and worked fine I will give you the mediabar files...just test it and let me know whether it works for you ok Quote
NikShiP Posted October 17, 2011 Report Posted October 17, 2011 I have the solution for mediabar...I did it in my port and worked fine I will give you the mediabar files...just test it and let me know whether it works for you gimme the files.. I'll try this in eve.. Also, is there any camera bug in the port?? Quote
Die2mrw007 Posted October 17, 2011 Author Report Posted October 17, 2011 gimme the files.. I'll try this in eve.. Also, is there any camera bug in the port?? I dont know, but many confirms that the port is pretty bug-free....so camera issue wont be there If so, then try my camera fix provided Quote
NikShiP Posted October 17, 2011 Report Posted October 17, 2011 I dont know, but many confirms that the port is pretty bug-free....so camera issue wont be there If so, then try my camera fix provided i saw a camera fix for 523x attached at binh24's blog.. Thats y i asked..??? Shashwat, is there any camera bug??? Or have u tried the fix?? Quote
shashwat Posted October 17, 2011 Report Posted October 17, 2011 i saw a camera fix for 523x attached at binh24's blog.. Thats y i asked..??? Shashwat, is there any camera bug??? Or have u tried the fix?? no i haven't tried the fix, as there was specifically written that camera patcher is for other languages. N i didn't try the camera, wil try d camera wen i wil shift back to his port Quote
Die2mrw007 Posted October 17, 2011 Author Report Posted October 17, 2011 i saw a camera fix for 523x attached at binh24's blog.. Thats y i asked..??? Shashwat, is there any camera bug??? Or have u tried the fix?? I provided my camera fix files extracted out of the C6v41 port i created for 5800 to Abhishek and prayaas1998 some days back If u dont wish to shift to v41....you could just port the camera fix files and web browser to your v40 and enjoy the updates Quote
NikShiP Posted October 17, 2011 Report Posted October 17, 2011 no i haven't tried the fix, as there was specifically written that camera patcher is for other languages. N i didn't try the camera, wil try d camera wen i wil shift back to his port bherry gooood... Quote
NikShiP Posted October 17, 2011 Report Posted October 17, 2011 I provided my camera fix files extracted out of the C6v41 port i created for 5800 to Abhishek and prayaas1998 some days back If u dont wish to shift to v41....you could just port the camera fix files and web browser to your v40 and enjoy the updates recently i've decided i dont wanna flash... May b tomarrow i'll release my cfw with these updates.. Nitesh, will u port it other variants...?? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.