Jump to content

[Stock ROMS] Pantech Burst all stock Roms


CrackUC

Recommended Posts

Here are the 2 Stock Roms available for Pantech Burst . Personally tested by me .

Gingerbread : Download link - HERE

Flash With CWM

Procedure : place the zip in the root of your sd card .

1.Install zip from sd card

2. (Select the zip )

3. Factory reset

4. Clear data

5. advance -> Clear dalvik cache .

Ice Cream Sandwich

Procedure : place the zip in the root of your sd card .

1.Install zip from sd card

2. (Select the zip )

3. Factory reset

4. Clear data

5. advance -> Clear dalvik cache .

Download Link :- HERE

PDL'S For Pantech Burst Stock Firmwares :- PDL's Provide complete stock state to phone including bootloader , Recovery , Firmware and everything .

Gingerbread :- Thread LINK

Follow the above thread to get back to Gingerbread.

ICS :-Download  LInk :- HERE

Procedure : -  Download This download tool from HERE.

1. Install Pantech PC suite And Make sure your device is recognizable by PC.

2. Enable USB debugging on your device by going to Settings->Developers Option -> Usb Debugging(tick this).

3. Install this ' P9070_Download_Tool_v3.3.exe ' . DOwnload  P9070_Download_Tool_v3.3.exe Tool from here

4. Make your phone in S/W Upgrade mode by shutting down first than pressing volume up-down together with power button till you see the S/W upgrade mode on screen .

5. Open the Tool ,

6. Posted Image

7. Click on open file And select The PDL File you just downloaded above.

8. Click on Download .

In 5-6 Minutes you'll  Have the Stock ICS right in your phone .

_______________________________________________________________________________________________________________________________________________________

INDEX: [iNDEX] Everything For Pantech Burst

DISCUSSION : Offcial Pantech Burst discussion thread

ESSENTIALS :[TUTORIAL] [Root]Pantech burst

[TUTORIAL] ClockWork Recovery Mod For Pantech Burst

ROMS: [ROMS] Pantech Burst Custom Roms

Stock firmwares : [stock ROMS] Pantech Burst all stock  Roms

Source Build Guides : [TUTORIAL] Compile Unoffcial Paranoid For Pantech burst

[TUTORIAL] Compile Unofficial CyanogenMod 10 for Pantech Burst

[TUTORIAL] Compile Unofficial AOKP for Pantech Burst

[TUTORIAL] Compile Unoffical AOSP ICS for Pantech Burst ( Codeaurora )

MODS/TWEAKS  : [TUTORIAL] How to Unlock Bootlaoder in Pantech burst

Miscellaneous : [TUTORIAL] Going Back To Gingerbread in Pantech Burst

[TUTORIAL] How to Make your pantech Burst recognizable

[TUTORIAL] How to remove All At&T Default apps/Bloatware from Pantech Burst

[TUTORIAL] 2G / 3G Toggle for Pantech Burst

[TUTORIAL] Unlock AT&T Pantech Burst

_______________________________________________________________________________________________________________________________________________________

Link to comment
Share on other sites

  • 3 months later...

its working bro :yahoo:

but new problem i am facing.. :rofl:

its unlock now

it is asking me

sim network unlock pin..

option

1) unlock

2) dismiss ~X(

i select dismiss

after that

i used ur software to unlock it...

Connecting to server... Established.

Verify User/Password ... Successful!

Available credits in account: 3107

Checking client version ... Verified.

 

Model: : Pantech P9070

- Download latest Client Software v5.29 :

http://mkey-support.com/LoginPlus/

IMEI : -- Don't provide your IMEI in open --CrackUC

Provider : ALL PROVIDERS

NCK : 81019225

~X(

but stil its unlock what i do now please help

Link to comment
Share on other sites

  • 3 weeks later...
  • 1 month later...

if i am on Ginger, i can root and flash via custom Recovery the ICS? or i MUST flash via P9070 Download Tool ?? Thanks

that question is because after i flashed the ICS the phone get Network Lock  and the unlock tool dont last forever (i will get more pantech burst for my friends)

well , when it stucks at network lock it must be asking unlock code ? Whats so hard in entering the code everytime ? Bro its the same everytime :D Once you got the code , that code is your unlock code for everytime . They are based on IMEI and by flashing IMEI doesn't change :D  . For the zip thingy I remember davempr has made something also flash davempr's deodexed rom for stock ICS via CWM . Or PDL is best restore !!
Link to comment
Share on other sites

o i know that aways the same, but  will more codes for more phones... and i think that unlock tool will not last forever xD

and for the zip, i can upgrade from GB to ICS via CWM ? so if i do that the phone will not lock and i will no need the unlock tool

well , that I can say about . I never observed that behaviour . Well , Atleast you can use any method w/o tension of unlock code for atleast your phone na -_-  . You got your unlock code and then be happy for your whole burst's lifespan as no need to generate again and again :D and  Unlock code can be purchased from ebay too at a very cheap cost too :)
Link to comment
Share on other sites

  • 3 weeks later...

i upgrade from GB to ICS using the ROM FILe not the PDL and there is a BRCMBluetoothServices  FC  at all time,  :( im sacre it only has 1600 unlock codes, so i can not purchase a lot of burst at the time hahahahha,  i will try flashing another custom ROM, and if not i will try the PDL (i already have the NCK for this phone) Thanks :) EDIT: if i put the ROM using the instructions of gizmolord ROM: ## Installation Procedure ## -Make you bootloader unlocked from this Guide : - unlock Pantech Burst's bootloader -place the zip in root of your SD card . -Boot into recovery. -Go to Mounts and storage and select format /system -select install zip from SD card . -select the zip. -Wipe data/factory Reset -Clear dalvik cache -mount /system from mounts and storage. -first boot will take sometime . There no problem (gizmo and Oficial Zip) Thanks, so the phone nots gona lock!

Link to comment
Share on other sites

  • 5 weeks later...

i upgrade from GB to ICS using the ROM FILe not the PDL

and there is a BRCMBluetoothServices  FC  at all time,  :( im sacre it only has 1600 unlock codes, so i can not purchase a lot of burst at the time hahahahha,  i will try flashing another custom ROM, and if not i will try the PDL (i already have the NCK for this phone)

Thanks :)

EDIT: if i put the ROM using the instructions of gizmolord ROM:

## Installation Procedure ##

There no problem (gizmo and Oficial Zip)

Thanks, so the phone nots gona lock!

I am also on GB stock but rooted and CWM 5.0.2.7

i want to flash CM10,

1.  but does i have to flash stock ICS pdl and then gizmolord or CM10

2.  OR just flash gizmolord from gingerbread via CWM 5.0.2.7 and then flash CM10.

i think u have chosen 2 method. Are you facing any issues or both the method are just the same.

please help...

Link to comment
Share on other sites

  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...