Jump to content

can't flash 5130


chetan

Recommended Posts

i was flashing my 5130 with jaf due to electricity failure ... my flashing was interrupt..... i try to flash again ..... but i couldn't...... some error comes.... here is the status bout my flashing... work..... JAF version 1.98.62 Detected PKEY: 9000AAC9 Card life counter: 99.99% P-key nokia module version 01.02 FBUS INTERFACE NOT CONNECTED!!! USB Cable Driver version: 7.1.69.0 Changing mode...Done! FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Searching for JAF saved location of ini... Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\ Searching for default location of ini... Checking path: \Products\RM-495\ Searching for JAF saved location of ini... Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\ No ini files found... FILES SET FOR FLASHING: MCU Flash file: NONE PPM Flash file: NONE CNT Flash file: NONE APE Variant file: NONE Searching for JAF saved location of ini... Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\ Searching for default location of ini... Checking path: \Products\RM-495\ Searching for JAF saved location of ini... Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\ Scanning ini files... Searching for default location of ini... Checking path: \Products\RM-495\ Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\ FILES SET FOR FLASHING: MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.mcusw PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.ppm_mh CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-495\rm495__07.97.image_CTV_INDIA_HINDI_red APE Variant file: NONE Languages in ppm: English,Hindi,Sinhalese Detected P-KEY: 9000AAC9 P-key nokia module version 01.02 Init usb communication... PRESS POWER ON NOW! Searching for phone...Found Sending RAW loader... Using 06.02.002     Elf2flash 09.07.000     CMT RAW loader... Patching RAW boot step1... Patching RAW boot step3... Sending RAW Loader... ...................Loader Sent! Stage 2 starting...............................................................................Loader Sent! Stage 3 starting..................Phone prepared OK! Waiting for the phone to boot... Searching for phone... Phone failed to boot in flash mode CMT... help plz....... 

Link to comment
Share on other sites

dude same error again flashing status anything wrong then tell

JAF version 1.98.62

Detected PKEY: 90009699

Card life counter: 99.99%

P-key nokia module version 01.02

FBUS INTERFACE NOT CONNECTED!!!

USB Cable Driver version: 7.1.69.0

Changing mode...Done!

FILES SET FOR FLASHING:

MCU Flash file: NONE

PPM Flash file: NONE

CNT Flash file: NONE

APE Variant file: NONE

Detected P-KEY: 90009699

P-key nokia module version 01.02

Init usb communication...

Phone Type:

FILES SET FOR FLASHING:

MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\rm-495\rm495__07.97.c0r

PPM Flash file: NONE

CNT Flash file: NONE

APE Variant file: NONE

Detected P-KEY: 90009699

P-key nokia module version 01.02

Init usb communication...

Phone Type:

FILES SET FOR FLASHING:

MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\rm-495\rm495__07.97.c0r

PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\rm-495\rm495__07.97.ppm_mh

CNT Flash file: NONE

APE Variant file: NONE

Languages in ppm: English,Hindi,Sinhalese

Detected P-KEY: 90009699

P-key nokia module version 01.02

Init usb communication...

Phone Type:

FILES SET FOR FLASHING:

MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\rm-495\rm495__07.97.c0r

PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\rm-495\rm495__07.97.ppm_mh

CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\rm-495\rm495__07.97.image_CTV_INDIA_HINDI_red

APE Variant file: NONE

Languages in ppm: English,Hindi,Sinhalese

Backing up CRT...

Detected P-KEY: 90009699

P-key nokia module version 01.02

Init usb communication...

Failed to backup CRT...

Detected P-KEY: 90009699

P-key nokia module version 01.02

Init usb communication...

PRESS POWER ON NOW!

Searching for phone...Found

Error reading phone init data...

Detected P-KEY: 90009699

P-key nokia module version 01.02

Init usb communication...

PRESS POWER ON NOW!

Searching for phone...Found

Sending RAW loader...

Using 06.02.002

    Elf2flash 09.07.000

    CMT RAW loader...

Patching RAW boot step1...

Patching RAW boot step3...

Sending RAW Loader...

...................Loader Sent!

Stage 2 starting...............................................................................Loader Sent!

Stage 3 starting..................Phone prepared OK!

Waiting for the phone to boot...

Searching for phone...

Phone failed to boot in flash mode CMT...

Link to comment
Share on other sites

Since the power failed in the middle of the flashing process the bootstrap loader of the phone is fucked up. Only a JAF box can revive your phone now. The same thing happened to my old 5300 once. I tried everything to revive it but in the end only the JAF box worked.

can't phoenix do the work ??
Link to comment
Share on other sites

  • 3 months later...
  • 1 month later...

ya..... i could't

the mobile repairer also told it can't be flashed bcoz flash ic is dead....

its of on use...... :(

hahaha flash ic is dead such a nubis rply evri i hv hrd

nd realy a profesnl hd replied u this hahaha realy vry funny if a prsn hd rplied u this then that guy is a noob

anyway ur fon cn b alivd jst give it to nokia care or a gud repair shop

nd dnt trust on any nuby prsn non of ic cn be damgd in this proces

Link to comment
Share on other sites

  • 1 month later...
  • 5 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...