Jump to content

variant certificate error


Recommended Posts

cfw file i have d'load in navifirm software. The ".mcusw", ".ppm" & ".image" these 3 files. and i had flash my mobile using J.A.F ...

and i had successfully done flash....but facing problem doesn't install any application.

i had competle flashing doing same process to this link: "http://forum.gizmolord.com/index.php?topic=2062.0" for my nokia 2690 mobile

Link to comment
Share on other sites

have u downloaded the fw files according to ur product code ..?

now try to flash in a new way ...

STEPS:

1. download all the fw files (including the signature.bin file also) from navifirm.

2. put all ur firmware files in C:\Program files\Nokia\Phoenix\Products\RM-xxx (xxx is ur RM-type ...I think urs is RM-635). If u don't find this folder in C:\ then create it according to the path. (Note: No need to rename any fw file. Just put the downloaded fw files into this path)

3. now open jaf pkey emulator.

4. tick manual flash, dead usb and normal mode ...untick crt 308.

5. after all these, tick "use ini" ....then a pop up window will open ...select ur phone from the list in that window.

6. switch off ur phone and connect to pc through usb cable.

7. click on FLASH.

Flash and see whether it works.

I ll update that tutorial soon :)

Link to comment
Share on other sites

i have d'load fw files according to my product code.. but when tick "use ini" then does not see nokia 2690 in pop up window .. and i have d'load singnature.bin file where i can select this in J.A.F? and i have already copy all files C:\Program files\Nokia\Phoenix\Products\RM-635...

Link to comment
Share on other sites

i have d'load fw files according to my product code..

but when tick "use ini" then does not see nokia 2690 in pop up window ..

and i have d'load singnature.bin file where i can select this in J.A.F?

and i have already copy all files C:\Program files\Nokia\Phoenix\Products\RM-635...

Copy paste this file in C:\Program Files\ODEON\JAF

You will see your phone in "use INI" menu list :)

Link to comment
Share on other sites

i have d'load fw files according to my product code..

but when tick "use ini" then does not see nokia 2690 in pop up window ..

and i have d'load singnature.bin file where i can select this in J.A.F?

and i have already copy all files C:\Program files\Nokia\Phoenix\Products\RM-635...

u can't select the signature.bin file manually in jaf ...

so u have to copy all the downloaded files into that path and tick "use ini" in jaf ...

and remember, in this method u shouldn't rename the .mcusw file to .c0r ...just put all the downloaded files as they are ..

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...