hackrishna Posted January 4, 2012 Report Posted January 4, 2012 There are 3 main causes for bricking and security fail 1. not preparing the computer for the flash (removing start up programs, running programs in the back ground during the flash etc... ) 2. not removing sim lock (makes no sense but still a cause). 3. not selecting the proper files to flash with. Forgetting to select "amss" in the multiloader will cause the "security fail". Some times you can reflash only the files from the firmware pack and correct this, but most of the time you will need to have it flashed with a service box. The main mistake we make is downloading different firmwares and trying them out, or flashed your phone before and just noticed a newer version is available. Most people do not delete the old firmware from their PC. When you download a new firmware, unpack it, then run the multiloader you must point the multiloader at the correct directory. When you start to select the files to flash with, it will open the last firmware folder you used, for boot files and again for the others. That is 2 times you risk of selecting files from other firmware that is sitting on your computer. This will not brick the phone every time but can end in a poor result. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.