Jump to content

New ICS custom-rom-for-alcatel-918n-2-3-6 (Idea smart phone id 198) blinking LED


The_Text

Recommended Posts

:yahoo: hi guys i am going to share new ics android os with PRE  INSTALL INT2EXT and more transparent...

verry cool look.... and blinking blue LED

By HellRocker and markL

Posted Image    [img width=280 height=420]http://gktestingchandwad.com/android/2.png

[img width=280 height=420]http://gktestingchandwad.com/android/3.png    [img width=280 height=420]http://gktestingchandwad.com/android/4.png

[img width=280 height=420]http://gktestingchandwad.com/android/5.png    [img width=280 height=420]http://gktestingchandwad.com/android/6.png

[img width=280 height=420]http://gktestingchandwad.com/android/7.png    [img width=280 height=420]http://gktestingchandwad.com/android/8.png

[img width=280 height=420]http://gktestingchandwad.com/android/9.png

downloading link is above...

http://www.mediafire.com/?zna53wa0crlfndz

and password is : dreamers

the installation process is  same as previous  only changes is that :

*create 2 partitions on your sd card using partition wizard.

(1st=fat32 ,  2nd=ext2,  all primary)

* install recovery clockworkmod on your 918n.

INSTALLING THE CUSTOM ROM:

1. Reboot to Recovery.

2. wipe data/factory reset.

3. wipe cache partition.

4. wipe dalvik cache

5. flash the ROM. reboot.

6. configure/setup (auto show after reboot)

enjoy... hit thankssorry for my poor english

Link to comment
Share on other sites

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

This new one has almost all apps "stopping unexpectedly" on my phone....

1) u need to power off your phone by pressing power key n press power off closing all force to close msgs..

2)then switch on phone if this happen again switch off your phone step 1

3) when phone normally switch on then reboot it one time...

Link to comment
Share on other sites

I can not see the duel sim tower indicator in the screen-shot of this version. Please advise if this is the case, or if it can be corrected. I am planning to update to this version.

actually it dual Sim ROM but i inserted only one Sim u can update this ROM it is very good  :D

Link to comment
Share on other sites

Same things happening with me. my case is worst. after 2 shutdown its restarting automatically while on boot. I have created 2nd partition of 4 gb. can this be the reason?

Mine does the same thing too...after pressing the power button during one of the "automatic reboots", it rebooted completely and I even saw the increased memory..But after rebooting -  after a "normal boot" - as per the instructions, it's started the automatic reboot again during the boot animation....I'm hoping it's the apps that were stopping unexpectedly getting fixed...how long did yours automatically reboot during the boot animation?
Link to comment
Share on other sites

Its installed and successfully working now. Thanks a lot  =D> . A quick query, will swapper work on this mod, on my stock it never worked. If that can be done it will be a cherry on top. Thanks again.

swapper will not work because we have created only ext2 partition ... Swpper work has to be done if we have the ext3 and Linux partition.... 

    1st partition:

    Label: Android-SD

    Create as: Primary

    File System: Fat32

    Partition size: as much as you want!

    2nd partition:

    Label: Android-EXT3 (2nd partition is for EXT which you can use for A2SD or Link2SD)

    Create as: Primary

    File System: EXT3 (be it a custom kernel or ROM with EXT4 support, use EXT3 still -play safe! )

    Partition size: MIN: 256 MB MAX: 1024MB (1GB)

    3rd partition:

    Label: (do not put anything)

    Create as: Primary

    File System: Linux Swap

    Partition size: MIN: 32MB MAX: 1024MB(1GB) RECOMMENDED: 256MB

Link to comment
Share on other sites

i've been trying to flash the ROM on CWM but it keeps on saying that "no files found". can anyone help me on this? im stuck on this step. thanks in advance.

Maybe your file structure is wrong ....

create  file structure as :

clockworkmod -> backup -> 2010-01-01.00.00.09

(2010-01-01.00.00.09 it is last folder in that put your rom files only files....)

Link to comment
Share on other sites

help!!! i badly need your help! i think i bricked my phone. it won't start. it's stock on the android logo when i turn it on then it blacks out then back on the android logo. it goes on and on and on and on. i can still access CWM but everytime i do restore, it says "md5 mismatch". now i don't know what to do. is there still any hope that my phone can be fixed? or does anyone here knows where i can have it fixed? i'm from QC Philippines. thanks in advance.

Link to comment
Share on other sites

@ blackdragon0327 Dont worry, its not brick yet :) I have faced the same problem while doing the installation. Download the file again. Extract and put it in the correct folder. You can use teracopy while you do the copy, to make sure source file and copied files are intact and same. flash the rom. it should work fine.

Link to comment
Share on other sites

@ dattulondhe Thanks a lot for your comment. I am ordering a class10 micro sd before I go along with the steps you informed. at the moment I have a class 4 sd card. I think it would not work faster if I try swap with this card. What do you suggest. If you think class 4 will suffice the purpose, I would start doing it once I am back home today. Eagerly waiting for your reply.

Link to comment
Share on other sites

swapper will not work because we have created only ext2 partition ... Swpper work has to be done if we have the ext3 and Linux partition.... 

    1st partition:

    Label: Android-SD

    Create as: Primary

    File System: Fat32

    Partition size: as much as you want!

    2nd partition:

    Label: Android-EXT3 (2nd partition is for EXT which you can use for A2SD or Link2SD)

    Create as: Primary

    File System: EXT3 (be it a custom kernel or ROM with EXT4 support, use EXT3 still -play safe! )

    Partition size: MIN: 256 MB MAX: 1024MB (1GB)

    3rd partition:

    Label: (do not put anything)

    Create as: Primary

    File System: Linux Swap

    Partition size: MIN: 32MB MAX: 1024MB(1GB) RECOMMENDED: 256MB

In this case Int2EXT would not work, correct??

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...