-how-to-update-from-bada-1-2-to-2-0/?action=dlattach;attach=3840)
-how-to-update-from-bada-1-2-to-2-0/?action=dlattach;attach=3842)
Steps To Be Followed:Install latest Samsung USB drivers (Download You are not allowed to view links.
Register or
Login)
Install latest Samsung KIES (Download You are not allowed to view links.
Register or
Login)
Connect your phone to PC via Samsung KIES mode and make sure that it recognizes the phone
You are not allowed to view links.
Register or
LoginUnzip RAR files to any specific folder on your PC
Switch off your phone and press Volume down key + Power key + Camera Key
A download screen will appear on your phone
Run Multiloader 5.65 only given with firmware or Download You are not allowed to view links.
Register or
LoginSelect LSI641 as below
-how-to-update-from-bada-1-2-to-2-0/?action=dlattach;attach=3844)
Tick Full Download
-how-to-update-from-bada-1-2-to-2-0/?action=dlattach;attach=3846)
Click Boot and select Boot folder
Click AMSS and select ‘amss.bin’ file which is located in the PC
Click Apps and select ‘apps_compressed.bin’ file which is located in the PC
Click Rsrc1 and select ‘Rsrc_ Open_Europe_Common.rc1’
Click Rsrc2 and select ‘Rsrc2_ (Low/Mid).rc2’
Click Factory FS and select ‘FactoryFs_ Open_Europe_Slav.ff
Click CSC and select ‘S85X0XXXXX.csc’
Click SHP APP and select ‘ShpApp.app’.It should like this
-how-to-update-from-bada-1-2-to-2-0/?action=dlattach;attach=3848)
Close Samsung Kies if opened
Connect your phone to PC via USB cable
Press Port Search and Download
Firmware will be installed in your phone now do not press any key on your phone or switch off your pc
Note:For proper working of firmware keep debugging level to low(*#33284*#) from keypad
